Grease and starch separators

A grease separator is a device that is intended to separate and hold inside all fats and starch and pourable materials generated in a kitchen, dining room, or any area where there are fats.

The Starch separators retain the starches and pourable materials that exist in the effluents from peeling machines potatoes and carrots.

Our separators are manufactured according to standard EN1825 (DIN 4040) and ISO9001.

Application:
  • Restaurants
  • Cafeterias andcanteens
  • RelatedCategories
  • Foodprocessingplants
Advantages:
  • Legal Limits met
  • Resistance
  • Maintenancefree
  • avoidclogging
  • Lifting rings
  • Flow rates from 3 l/s. to 1 000 l/sec.
  • Thick and sturdy HDPE walls
  • Handles for easymanouvering
Materials:
  • HighDensityPolyethylene (HDPE)
  • Stainlesssteel

Grease and Starch separator – Operation

The grease and Starch AlmAqua separators has two distinct zones: a zone of settling solids; and other separation of grease and fats.

In the first zoneis conducted the separation of starch and food debris from the dirty effluent.

By deflection, the effluent is led to the second zone, where it performs the settling of grease by density differences.

The output of the effluent from the second compartment is made at the lowest point.

The grease separator should be cleaned when it reaches its maximum storage capacity.

Grease and Starchseparator – MODELS

European standard EN-1825 – HDPE

  • SGD 4 w/ sludge trap

PEAD

 MODEL Flow (l/s) L lenght (mm) I width (mm) H height (mm) DN (mm) Sludge trap (liters) Greasa strorage (liters) Weight (kg)
SGD 4 4 1485 1200 1150 110 300 700 80
  • SGD 6 w/ sludge trap

PEAD

MODEL Flow (l/s) L lenght (mm) I width (mm) H height (mm) DN (mm) Sludge trap (liters) Oil strorage (liters) Weight (kg)
SGD 6 6 1970 1200 1150 110 1000 1000 90
  • SGD 8 w/ sludge trap

PEAD

MODEL Flow (l/s) L lenght (mm) I width (mm) H height (mm) DN (mm) Sludge trap (liters) Oil strorage (liters) Weight (kg)
SGD 8 8 2855 1200 1150 110 1500 1500 160
  • SGD 10 w/ sludge trap

PEAD

MODEL Flow (l/s) L lenght (mm) I width (mm) H height (mm) DN (mm) Sludge trap (liters) Oil strorage (liters) Weight (kg)
SGD 10 10 3370 1200 1150 110 1500 2000 170
  • SGD 15 w/ sludge trap

PEAD

MODEL Flow (l/s) L lenght (mm) I width (mm) H height (mm) DN (mm) Sludge trap (liters) Oil strorage (liters) Weight (kg)
SGD 15 15 3855 1200 1150 160 2000 2000 180
  • SGD 20 w/ sludge trap

PEAD

MODEL Flow (l/s) L lenght (mm) I width (mm) H height (mm) DN (mm) Sludge trap (liters) Oil strorage (liters) Weight (kg)
SGD 20 20 4285 1200 1150 160 2250 2250 240