Various

The screening box is a primary treatment organ that will retain all the larger solids present in the raw effluent, preventing these solids from entering treatment organs such as grease traps, septic tanks and ETARs.

Equipped with a bar grid, inclined at 45º, in galvanised steel, with a bar spacing of 25mm, it also has a basket for the draining of graded products.
They have total leak tightness, low weight, high chemical resistance, high mechanical strength and insensitivity to corrosion.

It has two full opening lids, for easy cleaning of the equipment, with locks.

Quick and efficient installation sample collecting box, manufactured in High Density Polyethylene by the rotomoulding process.

It has total leak tightness, low weight, high chemical resistance, high mechanical strength and insensitivity to corrosion.

Note: The total height of the equipment can be altered by means of extensions in HDPE. The diameter of the pipes will be defined for each application.

• Plastic housing 220x275x140 grey RAL 7035.
• AVEL level relay (RND20) for monitoring the water level.
• Power supply unit (FAL16) from AVEL 16 VA 230V/24V.
• AVEL Alarm Module (MCS-AL) for sound and light warning of grease accumulation or lack of water in the tank.
• Short circuit protection via circuit breaker.
• Alarm indication on (red LED of the alarm module).
• Switch for automatic (AUT), off (0) or manual (1) alarm operation (alarm module)

Features:

Cast iron lid manufactured according to ISO 1083 (1987) according to class D 400 of UNE-EN-124 (1995), inscribed with the legend "Water Treatment".

Description:

Circular cover, closes with a support ring through a safety device. The cover has a noise-reducing, non-slip polyethylene seal. The surface of the frame with recesses optimises its installation, as do the 4 holes for placing it securely on the ground.

Installation Zone:

Paved roads, verges, footpaths and car parks. (Group 4 of the UNE-EN-124 standard, 1995)

Manufactured using the rotomoulding process in medium density linear polyethylene.

• Several colours available
• Mechanical tightness
• Corrosion insensitivity
• Rectangular format
• UV-resistant
• Swivel castors with brake

RAL

Manufactured using the rotomoulding process in medium density linear polyethylene specific for the food area.

• Corrosion insensitivity
• UV-resistant
• Mechanical tightness

RAL

Manufactured using the rotomoulding process in medium density linear polyethylene specific for the food area.

• Double wall with possibility of filling with high density polyurethane
• Corrosion insensitivity
• UV-resistant
• Mechanical tightness

RAL

Two-piece floats for hoses, hoses, cables and tubes (315mm diameter)

Manufactured using the rotomoulding process in medium density linear polyethylene.

• Corrosion insensitivity
• Can be filled with polyurethane
• UV-resistant
• Mechanical tightness
• Several colours available
• Cylindrical shape
• Stainless steel accessories

RAL

Box for fish storage

Manufactured using the rotomoulding process in medium density linear polyethylene.

• Several colours available;
• UV resistant;
• Stackable;
• Easy to wash;
• Rectangular format

RAL