Guardian Automatic Grease Separator

Fat separator

Guardian Automatic Grease Separator

A grease separator is a piece of equipment whose purpose is to separate and retain all the grease and decantable materials generated in a kitchen, canteen or any other place where food grease is present.

Our Separators are manufactured in accordance with the standard EN1825 (DIN 4040) and ISO9001.

https://almaqua.com/wp-content/uploads/2024/05/slide-3-1.jpg

FeaturesAlmaqua

Application:

Compact separators with self-cleaning function, made of stainless steel.
They separate fats and decant solids from kitchen water.
They can be placed on the ground (under the stall) or buried.

Compacts under the Stand:

Compact separators, for manual cleaning, manufactured in stainless steel.
They separate fats and decant solids from kitchen water.
Due to their very compact design they are normally installed on the ground under the washbasin.

Liabilities:

Grease separators with or without incorporated decanter made of PEAD or PRFV.
They are usually large in size and operate buried in the ground.
It is maintained by being cleaned by tanker trucks.

Application:

Restaurants
Canteens and refectories
Bakery and Pastry Shop
Food processing plants

Advantages:

Comply with Legal Limits
Resistant / Safe
Maintenance Free
Prevent clogging

Materials:

High Density Polyethylene (HDPE)
Stainless steel
https://almaqua.com/wp-content/uploads/2024/05/Grease-Guardian-1.jpg
Guardian Automatic Grease Separator

The system works in three stages:

STAGE 1 - Solids collection
The effluent coming from the kitchen is led directly through an inlet pipe, where there is a basket for removing solids and debris. There is an easily accessible and independent lid for cleaning the basket.

STAGE 2 - Separation of oils and fats
The effluent containing non-emulsified oils and fats enters the retention chamber. The oils and fats float freely and immediately rise to the surface, becoming trapped. The remainder (treated water) will flow out under the discharge.

STAGE 3 - Self cleaning and grease removal
A heating system located in the holding chamber is activated by a timer. The timer is programmed individually for each case. A motor drives the wheels that collect the liquefied materials on the surface, which are then removed by the wheel scrapers, which transfer them to an external pipe. The oils and fats removed are led through a pipe to the collection container - supplied with the system.

European Standard EN 1825 High Density Polyethylene

Technical Specifications

DIMENSIONS

 

Model Millimetres Service flow l/s
A B C D E F -Ø
D1 150 150 200 640 330 60 0,75
D2 240 230 240 720 410 60 1,25
D3 310 260 270 840 450 90 1,75
D4 300 220 270 890 450 115 2,25
D5 400 320 270 1420 560 115 3,5
PROPERTIES
  • Self-cleaning cycle, removes separated grease without operator intervention.
  •  Reversible architecture, allowing easier assembly.
  • Constructed of corrosion-resistant materials, it can be installed virtually anywhere.
  • Installation ready to connect, i.e. with the grease/oil container and timer.
SPECIFICATIONS

 

Model D1 D2 D3 D4 D5
Material 1.6m thick, AISI 304 stainless steel, bright finish
Tram 50 Hz, 230 V, 1500 W - CE conformity
Nº Wheels

(Skimmers)

1 1 2 2 3
Drainage capacity

fat

12 kg/h 12 Kg/h 24 Kg/h 24 kg/h 36 kg/h
Retention of

solids - L

2,5 4,4 8 10 10